Filter
Top Products
49
5 Connected device: Begin
recording when the scene you
wish to copy appears. Stop
recording when copying is
complete.
6 This camcorder: Stop playback.
NOTES
• We recommend powering the
camcorder using the compact power
adapter.
• When recording to a VCR using an
analog connection –connection type
or ( 47)–, the quality of the edited
tape will be lower than the original.
• When recording to a digital video
recorder using the DV terminal
–connection type ( 47)–:
- If the picture does not appear,
disconnect the DV cable and restore
the connection after a short while or
turn the camcorder off and then on
again.
- Proper operation cannot be
guaranteed for all digital devices
equipped with a DV terminal. If the
operation does not work, use the AV
terminal.
Audio Dubbing
You can add sound to a recording using
the built-in or an external microphone.
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [ 12bit] audio
( 39). This function is operated with the
wireless controller.
1 Locate the point where you want
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory ( 33) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
2 Start playback and immediately
press .
3 Press .
“AUDIO DUB.” and appear.
4 Press to begin dubbing.
Speak into the microphone.
1
3
2
(19)
REW
PLAY
FF
STOP
PAUSE
SLOW
AUDIO DUB.
ZERO SET
MEMORY
TV SCREEN
STOP
PAUSE
AUDIO DUB.
PAUSE
AUDIO DUB.
PAUSE