Canon MD 215 Camcorder User Manual


 
65
Lithium Button Battery
Do not pick up the battery using
tweezers or other metal tools, as this
will cause a short circuit.
Wipe the battery with a clean dry
cloth to ensure proper contact.
Storage
If you do not intend to use the
camcorder for a long time, store it in a
place free of dust, in low humidity, and
at temperatures not higher than 30 °C.
Cleaning
Camcorder Body
Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloth or volatile
solvents such as paint thinner.
Lens and Viewfinder
If the lens surface is dirty, the
autofocus may not work properly.
Remove any dust or dirt particles
using a non-aerosol type blower
brush.
Use a clean, soft lens-cleaning cloth
to gently wipe the lens or viewfinder.
Never use tissue paper.
LCD Screen
Clean the LCD screen using a clean,
soft lens-cleaning cloth.
Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
WARNING!
The battery used in this device may
present a fire or chemical burn hazard
if mishandled.
Do not disassemble, modify, immerse
in water, heat above 100 °C or
incinerate the battery.
Backup battery: Replace with a
CR1616 battery made by Panasonic,
Hitachi Maxell, Sony, Toshiba, Varta or
Renata. Use of other batteries may
present a risk of fire or explosion.
Lithium battery for the wireless
controller: Replace with a CR2025
battery made by Panasonic, Hitachi
Maxell, Sony, Sanyo, or with
Duracell2025. Use of other batteries
may present a risk of fire or explosion.
Do not insert the battery into the
mouth. If swallowed, seek medical
assistance immediately. The battery
case may break and the battery fluids
may cause internal damage.
Keep the battery out of the reach of
children.
Do not recharge, short-circuit or insert
the battery in the wrong direction.
The used battery should be returned
to the supplier for safe disposal.
Maintenance/Others
COPY