Filter
Top Products
34
Playing Back on a TV Screen
The AV terminal also serves as headphones terminal. When “H” is displayed on the
screen, change the setting following the procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to
[AV] and close the menu.
TVs with SCART Terminal
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Connect the PC-A10 SCART Adapter to the TV or VCR’s SCART terminal.
3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the audio/video terminals on the SCART Adapter.
Connect the white plug to the white AUDIO terminal L (left), and the red plug to the
red AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.
4. If connecting to a TV, set the input selector to VIDEO. If connecting to a
VCR, set the input selector to LINE.
The supplied PC-A10 SCART Adapter is for output only. For analog line-in
recording or analog-digital conversion, please use a SCART Adapter with input
capability (commercially available).
CARD PLAY
CARD CAMERA
PLAY (VCR)CAMERA
AUDIO
(L/MONO)
AUDIO
(R)
VIDEO
STV-250N Stereo Video
Cable (supplied)
Signal flow
PC-A10 SCART
Adapter
AV/PHONES ••AVVCR SETUP
( 38)