Canon MV700i Camcorder User Manual


 
137
Additional
Information
E
Battery Pack Handling Precautions
DANGER!
Treat the battery pack with care.
Keep it away from fire (or it might explode).
Do not expose the battery pack to temperature higher than 60 ºC. Do not leave
it near a heater or inside a car in hot weather.
Do not try to disassemble or modify it.
Do not drop or knock it.
Do not get it wet.
Charged battery packs continue to discharge naturally. Therefore, charge them on
the day of use, or the day before, to ensure a full charge.
Attach the terminal cover whenever a battery pack is not in use. Contact to metallic
objects may cause a short circuit and damage the battery pack.
Dirty terminals may cause a poor contact between the battery pack and the
camcorder. Wipe the terminals with a soft cloth.
Since storing a charged battery pack for a long time (about 1 year) can shorten its
lifecycle or affect performance, we recommend to discharge the battery pack fully
and to store it in a dry place at temperatures no higher than 30 ˚C. If you do not
use the battery pack for long periods, charge and discharge it fully at least once a
year. If you have more than 1 battery pack, perform these precautions at the same
time for all battery packs.
Although the battery pack’s operating temperature range is from 0 ˚C to 40 ˚C, the
optimal range is from 10 ˚C to 30 ˚C. At cold temperatures, performance will
temporarily decline. Warm it in your pocket before use.
Replace the battery pack if the usable time after full charge diminishes substantially
at normal temperatures.
About the battery terminal cover
The battery terminal cover has a [ ]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs. For example, with
charged battery packs, attach the terminal cover so that the [ ]-shaped hole shows
the blue label.
BD
Back side of the battery pack Terminal cover attached
Charged
Uncharged