Filter
Top Products
127
Direct Printing
E
Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select
[TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
•Move the zoom lever toward T to shrink the frame, and
toward W to enlarge the frame.
•To cancel the trimming settings, move the zoom lever toward
W until the trimming frame disappears.
3. Move the trimming frame.
•Turn the SET dial to move the frame to the right and left, or
up and down. Pressing the SET dial switches between the
directions.
•Pressing the MENU button brings you back to the print
settings menu.
❍ About the color of the trimming frame (CP-Printers only):
-White: No trimming settings.
-Green: Recommended trimming size. (The trimming frame may not appear
in green depending on the image size, paper size or borders settings.)
- Red: The image is magnified beyond recommended size. The image may
print out coarsely.
❍ The trimming setting applies only to one image.
❍ The trimming setting is cancelled with the following operations:
-When you turn off the camcorder.
- When you disconnect the interface cable.
- When you expand the trimming frame beyond its maximum size.
W
T
T