Canon PowerShot A20 Digital Camera User Manual


 
45
Shooting Continuously
Use this mode to shoot successive frames
while the shutter button is pressed.
1
2
1
Turn the mode dial to .
2
Press the / button as
necessary so that the
appears on the LCD monitor.
3
Press the shutter button
down all the way to start
shooting.
To stop shooting, release the shutter
button.
The camera will shoot continuously at the
speed of approx. 2.5 images per second*
(When the LCD monitor is OFF in Large/
Fine mode).
* The figures reflect standard shooting conditions
established by Canon. Actual figures may vary
according to the subject and shooting
conditions.
The camera will stop shooting if the CF card
becomes full.
If internal memory becomes full, interval
between shots may lengthen slighty.
If you are using the flash, shots are taken
more slowly to allow time for the flash to
recharge.