Filter
Top Products
48
Selecting an AF Frame Manually
(when [FlexiZone] is selected)
1
Turn on the LCD monitor.
2
Press the button several times until
the AF frame turns green.
zDepending on the shooting mode, you can switch
between the following setting options by pressing the
button.
3
Use the , , or button to move
the AF frame to the desired position and
press the button.
zIf you hold down the button, the AF frame will
return to the original position (center) (at the same
time, the setting options will switch as shown in the
above table).
Exposure compensation/AF frame
Shutter speed/Exposure compensation/AF frame
Aperture value/Exposure compensation/AF frame
Shutter speed/Aperture value/AF frame
zWhen [Spot AE Point] is selected as the light metering
mode, you can use the selected AF frame as the Spot
AE Point (p. 56).
zIt cannot be selected while manual focus (p. 51) or
reverse display (Basic Guide p. 7) is being used.
zThe position of the AF frame returns to the center once
the power is turned off.