Filter
Top Products
183
Appendix
2
Attach the conversion lens
adapter to the camera by aligning
the part of the adapter marked (A)
with the ring release button, then
rotating it until the mark.
zIf you wish to mount the Macro Twin
Lite MT-24EX on the camera, it is
recommended that you first attach the
Macro Lite Adapter 58C (sold
separately).
zIf you wish to use the Close-up Lens
250D (p. 186) together with the Macro
Ring Lite MR-14EX or Macro Twin Lite
MT-24EX, the Close-up Lens 250D
should be attached first followed by the
Macro Lite Adapter 58C (sold
separately).
3
Attach the controller to the
camera’s hot shoe.
4
Macro Ring Lite MR-14EX
Press and hold the release
buttons on both sides of Macro
Ring Lite MR-14EX and fit it into
the conversion lens adapter.
Macro Twin Lite MT-24EX
Press and hold the release button
on the top of the external ring and
fit it into the conversion lens
adapter or Macro Lite Adapter
58C.
Release buttons
Release
buttons