Filter
Top Products
Downloading Images to a Computer
89
Slide the camera’s mode switch to .
• The replay screen will display and when the connection to
the computer is complete, the LCD monitor will shut off
and the indicator will glow green.
• Always press the PUSH button on
the connector when detaching the
cable from the camera’s Digital A/V
Out terminal.
• If the USB cable is detached while the camera power is on, the
camera will power down.
• When the camera is connected to a computer, a warning
displays on the computer display after 5 minutes if the camera
is not used. The camera shuts down if a further minute passes
without a button being pressed. To restore power, press the
main switch again.
• Please refer to the Software Starter Guide for the subsequent
procedures.
PUSH Button