27
2.
Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
Use the toggle on the wrist strap or slip a fingernail under the
edge of the camera's DIGITAL terminal cover, lift up and plug the
interface cable in all the way.
2. Slide the camera's mode switch to
(playback) and turn on the
power.
The camera and computer will be able
to communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
Interface Cable
DIGITAL Terminal
USB Port
Interface Cable
If the Digital Signature Not Found window appears,
click [Yes]. The USB driver will automatically finish installing
onto the computer when you attach the camera and open a
connection.
Downloading Images to a Computer