Filter
Top Products
32
When you set the flash coverage manually, the setting was a
higher number than the lens focal length, resulting in a dark
periphery.
X Set the flash coverage that is a lower number than the lens focal
length or set it to auto zoom. (p.18)
If only the bottom of the picture looks dark, you were too
close to the subject.
X Keep at least 0.7 m/2.3 ft away from the subject.
There was a highly reflective object (glass window, etc.) in
the picture.
X Use FE lock. (p.15)
The subject has a very dark or light color.
X Set flash exposure compensation. For a dark subject, set a
decreased flash exposure. And for a bright subject, set an
increased flash exposure. (p.14)
You used high-speed sync.
X With high-speed sync, the effective flash range will be shorter.
Make sure the subject is within the effective flash range displayed.
(p.16)
The shooting mode was set to <W>, and the scene was
dark.
X Use a tripod or set the shooting mode to <V>. (p.12)
The periphery or bottom of the picture looks dark.
The flash exposure is underexposed or overexposed.
The picture is really blurred.
A52_E.book Page 32 Friday, June 10, 2005 4:40 PM
COPY