Filter
Top Products
Changing Playback Function Settings
149
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qr
buttons to choose an option.
You can adjust the settings in the 1 tab by pressing the 1 button (p. 45).
Choosing the Image that First Displays in
Playback
● Choose [Resume], then press the qr
buttons to choose an option.
Continuous
Image stabilization is always on.
You can confirm the effects
directly on the display, which
makes it easier to check the
composition or focus.
Shoot Only
Image stabilization is only active
at the moment of shooting.
Panning
Image stabilization only counters
up and down motion. This option
is recommended for shooting
objects moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
Changing Playback Function Settings
Last seen
Resumes with the image last
viewed.
Last shot
Resumes with the most
recently shot image.
COPY