Filter
Top Products
Controlling the Camera from the Wireless Controller
ENGLISH
19
To fix the focus
Press the n button.
■ This switches auto-focus off and fixes the focus.
To focus on nearby subjects
Press the r button.
■ This enables switching the camera to manual focus mode while
moving the focal point closer to the camera.
■ Holding the button down moves the focal point closer to the
camera.
To focus on distant subjects
Press the e button.
■ This enables switching the camera to manual focus mode while
moving the focal point further from the camera.
■ Holding the button down moves the focal point further away
from the camera.
■ At some zoom settings, the camera may not be able to focus
on the subject (→ P.17).
Adjusting the Brightness (BRIGHT)
This function brightens or darkens the image on the monitor. When the camera is switched on,
the brightness is set to the Normal level.
To brighten or darken the image
Press the z side of the button to brighten the image and
the x side to darken the image.
■ The image gradually brightens (or darkens) while the button is
held down.
Darker BrighterNormal brightness
■ The Normal brightness setting corresponds to setting [5] in the
AE REFERENCE screen (→ P.27). The brightest setting is [10]
and the darkest setting is [1].
■ It may not be possible to adjust the brightness when the area
around the subject is extremely dark. In this event, use lighting
to brighten the area around the subject.
321
AF
654
MF
987
0
MENUID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W
321
AF
654
MF
987
0
MENUID
HOME
Fn
BRIGHT
ON SCREEN
∞
SET/OK CANCEL
ZOOM
T
W