Filter
Top Products
253
Trouble?
Cannot save recordings on my computer
- When the memory contains too many recordings (Windows –
2,500 or more photos/MP4 movies, Mac OS – 1,000 or more pho-
tos/MP4 movies), you may not be able to transfer recordings to a
computer. Try using a card reader to transfer recordings from the
memory card.
Donly: To transfer the recordings in the built-in memory,
copy them to the memory card in advance (A 138).
After touching the camcorder’s NFC touchpoint to the touchpoint of
an NFC-compatible device, the device is not correctly recognized.
- Align the center of the touchpoints on the camcorder and the other
device. If there is no reaction, try slightly moving the devices while
they are touching.
- The NFC function may be turned off. Set 1 > q > [NFC] to
[i On].
D Wi-Fi Functions
Refer also to the instruction manual of the access point and other
devices you will use.
Cannot connect with the access point.
-Check that the access point is working correctly.
- The effective communication range between the camcorder and
access point may vary depending on the strength of the wireless
signal. Try using the camcorder closer to the access point.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).