Filter
Top Products
b Synchronizing with an External Device
76
NOTES
• The user bit of the time code signal is output while the camcorder is recording in mode or during
playback of a clip in mode. When the [J Other Functions] [Frame Rate] setting is set to [24P] and
the [L TC/UB Setup] [User Bit] [Output Mode] setting is set to [Pulldown], the user bit will be 2:3
pulldown data. In other words, when a recording in 24P mode is output from the HD/SD SDI terminal, the
signal is converted to 60i using the 2:3 pulldown method. An external device can receive the data used in this
conversion (2:3 pulldown data) to convert the signal to 1080/24P specifications.
COPY