Filter
Top Products
151
Menu Options
1
Not available in the [Photos] index screen.
2
Setting options for [Assign Button]: [(NONE)], [Img Stab.], [Powered IS], [Focus Limit], [Face AF], [Select Face], [Backlight],
[Spotlight], [Tele-converter], [Peaking], [Zebra], [WFM (LCD)], [Magnification], [TL-H58], [WD-H58W], [Color Bars],
[IR Monochrome], [IR Light], [Markers], [LCD Setup], [LCD/VF B&W], [Onscreen Display], [Add Shot Mark 1], [Add Shot Mark 2],
[Add e Mark], [Add Z Mark], [Time Code], [Time Code Hold], [Audio Output CH], [Audio Level], [Wireless Controller], [Photo],
[Delete Last Clip], [Status].
The default settings are as follows. [1]: [Powered IS], [2]: [Zebra], [3]: [WFM (LCD)], [4]: [Magnification], [5] to [10]: [(NONE)].
3
[12], [15], [18], [20], [21], [22], [23], [24], [25]
When [Bit Rate/Resolution] is set to [50 Mbps 1280x720] or [35 Mbps 1280x720], you can also select:
[26], [27], [28], [30], [32], [34], [37], [42], [45], [48], [50]
4
Available in the clip index screen only.
5
Available in the clip index screen and [e Mark] index screen only.
6
Available in the [Photos] index screen only.
[Reset]
[All Settings]: Resets all of the camcorder settings except for the hour meter to default settings.
[Camera Settings]: Resets all [l Camera Setup] settings and custom picture settings to default settings. In
addition, the white balance, aperture, focus and gain are set to auto and the shutter speed is set to off.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp]: Allows you to set whether the front and rear tally lamps illuminate while the camcorder is recording.
[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicator
illuminates while the camcorder is accessing a CF card or SD card.
[Title Prefix]: Determines the first 2 letters of the clip name. Combined with the [Number Setting] setting, this
constitutes the 6-character clip name.
[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, this
constitutes the 6-character clip name. Select [Set] to assign a desired number to the first clip you record or
select [Reset] to reset the number to [0001]. The numerals increase every time a clip is recorded.
[Delete Last Clip]: Deletes the last clip you recorded. This setting option will not appear if you turned the
camcorder off since recording the last clip.
[Custom Function] [Shockless Gain] [Fast], [Normal], [Slow], [Off] N –
104
[Shockless WB] [On], [Off] N –
[AE Response] [Fast], [Normal], [Slow] N –
[Iris Limit] [On], [Off] N –
[I. Ring Direction] [Reverse], [Normal] N –
[F. Ring Direction] [Reverse], [Normal] N –
[Z. Ring Direction] [Reverse], [Normal] N –
[F. Ring Control] [Fast], [Normal], [Slow] N –
[Z. Ring Control] [Fast], [Normal], [Slow] N –
[F. Assist. B&W] [Both], [Magnify], [Peaking], [Off] N –
[Obj. Dist. Unit] [Meters], [Feet] N –
[Zoom Indicator] [Bar], [Number] N –
[ZR-2000 AE SHIFT] [AE Shift], [Iris] N –
[Scan Reverse Rec] [Both], [Vertical], [Horizontal], [Off] N –
[Character Rec] [On], [Off] N –
[Reset Hour Meter] [Cancel], [OK] N N –
[Initialize Media] [CF A] [Cancel], [OK]
N N
36[CF B]
[SD Card] [Complete], [Quick] N N
[Firmware] – N – –
Menu item Submenu Setting options 0
COPY