Filter
Top Products
112
Selecting the Drive Mode
Changing the Drive Mode
1. Set the dial to a recording program other than and move the / (card/
tape) switch to .
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button pressed down.
Maximum number of continuous shots at one time:
- These figures are approximate and vary with the recording conditions and subjects.
- Sufficient space on the memory card is required. The continuous shooting will stop when the card is
full.
Continuous Shooting Captures a quick series of still images while you hold the PHOTO button
pressed down. For the number of frames per second, refer to the table
below.
High-Speed Continuous
AEB
(Auto Exposure Bracketing)
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps).
Single Records a single still image when you press the PHOTO button.
Frames per Second Maximum Number of
Continuous Shots
Normal speed High speed
2.5 frames 4.1 frames 60 images
PHOTO button
DRIVE MODE
button