Canon XL H1 Camcorder User Manual


 
103
E
Playback
We recommend powering the camcorder from a household power outlet.
When connecting to the RCA terminal, set the RCA/BNC selector down to RCA. When connecting
to the BNC terminal, set the RCA/BNC selector up to BNC.
TV sets with S1-Video terminals: Recording made with a 16:9 aspect ratio ( 48) will
automatically be played in widescreen mode if you connect the camcorder to the TV using the S1-
VIDEO terminal.
TV sets equipped with the ID-1 System: Recording made with a 16:9 aspect ratio ( 48) will
automatically be played in widescreen mode whether you connect the camcorder to the TV using
the S(S1-) VIDEO terminal or the VIDEO terminal.
In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode,
the picture may be distorted.
Connection to a Normal TV or Monitor (Non-HDTV/HiVision)
Using the COMPONENT OUT (D-)Terminal
Refer to the connection diagram in the previous section ( 101).
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option
and close the menu.
Using the S-VIDEO or VIDEO Terminal
Refer to the connection diagram in the previous section ( 102).
If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
Refer also to the instruction manual of the TV or VCR.
We recommend powering the camcorder from a household power outlet.
When connecting to the RCA terminal, set the RCA/BNC selector down to RCA. When connecting
to the BNC terminal, set the RCA/BNC selector up to BNC.
TV sets with S1-Video terminals: Recording made with a 16:9 aspect ratio ( 48) will
automatically be played in widescreen mode if you connect the camcorder to the TV using the S1-
VIDEO terminal.
TV sets equipped with the ID-1 System: Recording made with a 16:9 aspect ratio ( 48) will
automatically be played in widescreen mode whether you connect the camcorder to the TV using
the S(S1-) VIDEO terminal or the VIDEO terminal.
In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode,
the picture may be distorted.
1
2