Filter
Top Products
101
E
Playback
Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the POWER dial to .
2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON].
3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or
[SD LOCKED] to match the video output you wish to use.
4. Close the menu.
Using the COMPONENT OUT (D-) Terminal
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option
and close the menu.
2
AUDIO
VIDEO
R
L
S (S1)-VIDEO
INPUT
Signal flow
Stereo Cable
(supplied)
Signal flow
DTC-1000 Component Video Cable (supplied)
Open the terminal cover
Blue
Green
Red