Canon ZR20 Camcorder User Manual


 
46
E
Using the Full
Range of Features
Taking Still Pictures
You can record still pictures like a photograph. The camcorder records the picture
and sound to tape for several seconds. The exposure is automatically adjusted.
Take still photos that you can record onto a floppy disk with the optional Floppy
Disk Still Image Recorder FR-100 ( 48) and transfer to a PC for image
enhancement and printout. Also, starting your shooting with a still photo makes it
easy to find the beginning again later with the Photo Search function ( 72).
You can take a still picture at any time during regular video recording, or you can
put the camcorder into record pause mode first, then take a still picture.
Press the PHOTO button fully down and the still picture will be taken
immediately.
The camcorder takes the image immediately, and then records the “photo” to the
tape for approximately 6 seconds. During this time the camcorder also records
the sound, and the display shows the still picture.
A counter display appears, and counts up as the camcorder records the picture.
The camcorder returns to record pause mode.
1. Press the PHOTO button halfway down and hold it:
“PHOTO” flashes at the bottom right of display.
Exposure is locked.
During autofocus
F
flashes white in the display as the camcorder adjusts the
focus and it is displayed continuously as a green mark when the camcorder
is ready to take the still picture.
During record pause mode
During record mode
PHOTO
1
2
CAMERA
3_ZR20_E(35-73) 3/12/01 13:50 Page 46