Filter
Top Products
87
E
Editing
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
4. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camcorder or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camcorder becomes set to playback pause mode.
AUDIO DUB.••AUDIO IN VCR SET UP
( 39)
POWER
CAMERACAMERA
PLAY(VCR)
OFF
REW
PLAY
FF
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
AV
INSERT
PAUSE
SLOW
+ /
– /
×2
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
PLAY
(VCR)
Preparations
Dubbing
Turn the camcorder’s POWER switch to PLAY (VCR) and load a recorded
cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Notes:
• When you add sound using the built-in microphone make sure not to connect
any cables to the MIC terminal.
• To use your TV to monitor video, connect the S-video terminal ( 34) or the
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones only when using the S-video terminal ( 33).