Filter
Top Products
10
3. Click the [Setting(S)] button.
Click the [Cancel] button to cancel the operation.
• Check that the number of the RS-232C terminal (serial port) on
your PC connected by the cable is the same as the port number
(COM1-COM9) displayed by the communication port setting in
the preferences dialog box.
• Read the instruction manual of your PC for the number of the
RS-232C terminal.
• If the number of the RS-232C terminal connected is different
from the communication port number in the preferences dialog
box, select the communication port number connected.
4. Click the [Test(T)...] button.
• When the “The camera was recognized.” dialog box is
displayed, click the [OK] button and then click the [OK] button in
the preferences dialog box.
• When an error message is displayed, the digital camera is not
communicating correctly with Photo Loader. If this occurs, check
that the digital camera is correctly connected to the PC and try
again.