Casio EX-Z4U Digital Camera User Manual


 
INTRODUCTION
14
Lens
Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
Other
The camera may become slightly warm during use. This
does not indicate malfunction.
If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
Condensation
When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery compartment
cover open for a few hours.