Filter
Top Products
55
PLAYBACK
Playing an Audio Snapshot (EX-M2 Only)
Perform the steps below to display an audio snapshot (indi-
cated by a indicator) and play its audio.
1.
In the PLAY mode, rock the controller left or
right until the image you want is displayed.
2.
Click the controller.
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
IMPORTANT!
• Audio volume can be adjusted only when playback is
being performed or is paused.
• When you have the LCD remote controller connected
to the camera, audio is output through the stereo
headphones (page 97) instead of the camera’s
speaker. Output through the headphones is monaural.
• The volume of audio recorded with the camera cannot
be adjusted using the LCD remote controller. Use the
camera’s controller to adjust volume level in this case.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Hold the controller left or
right.
Click the controller.
Rock the controller up or
down.
Press MENU.