Filter
Top Products
APPENDIX
235
Using the USB Cradle to Charge the
Battery
You can charge the camera’s NP-20 rechargeable lithium
ion battery by setting the camera onto the USB cradle.
1.
Load the rechargeable litium ion battery (NP-
20) into the camera.
2.
Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• Note the shape of the AC adaptor depends on the
area where you purchased the USB cradle/AC
adaptor.
AC Adaptor
[DC IN 5.3V]
USB Cradle
AC power cord
NOTE
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC, 50/60Hz. This means the AC adaptor can be
used in various countries around the world. Note,
however, that there may be some problems with the
AC power cord withstand voltage and with the
configuration of power outlet shapes in certain
geographic areas. Before trying to use the AC
adaptor in another country, be sure to check with
your travel agent concerning the local power supply.
• Never use the AC adaptor with a voltage converter.
USB Cradle
AC Adaptor
[DC IN 5.3V]