Filter
Top Products
75
Advanced Settings
. To change Auto Shutter trigger sensitivity (Sensitivity)
1. Use [8] and [2] to select “Sensitivity” and then press [6].
2. Use [4] and [6] to select the sensitivity setting you want, and then
press [SET].
• You can select any one of three sensitivity levels, from ø (Lowest) to
œ (Highest).
• With the œ (Highest) setting, the auto shutter release is triggered relatively
easily. Auto shutter release triggering becomes more difficult with the ø
(Lowest) setting, but recorded images have the least blur. Experiment with
Auto Shutter trigger sensitivity settings to find the one that work best for you.
. Using Auto Shutter in Combination with Continuous Shutter
When shooting in combination with Continuous Shutter (page 70), the camera will go
back into Auto Shutter standby after shooting of the CS images is complete, so it will
be ready to shoot again.
To stop an ongoing Continuous Shutter operation, wait until “0 Auto” is flashing on
the monitor screen, and then press [SET].
Tips for Better Auto Shutter Snapshots
• Using Auto Shutter in combination with Anti Shake (page 77) reduces the chance
of image blur even more.
• While recording with Detect Blur or Detect Smile, keep the camera as still as
possible until the recording operation is complete.