Filter
Top Products
88
Establishing a Wireless LAN Connection
You can use Quick Send to send a snapshot you just recorded with the camera to a
smartphone.
• Note that you will not be able to use Quick Send to send a snapshot to a
smartphone if you performed any one of the operations below after recording the
snapshot.
– Exiting the REC mode to the PLAY mode or turning off the camera
– Resetting the camera (page 109) or formatting camera memory (page 109)
– Selecting Remote Capture
– Performing a movie recording operation
1. On the camera, enter the REC mode and shoot the snapshot.
2. Touch the “ ” (Quick Send) icon.
3. Touch “Send”.
4. On your smartphone, start up the EXILIM Remote app.
This will establish a connection between your camera and the smartphone, and
send the snapshot you just recorded to the smartphone.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 86).
5. After image send is complete, tap “OK” on your smartphone.
The connection between your camera and the smartphone will be terminated
automatically after the send operation is complete.
NOTE
• You can specify the size of the image sent to the smartphone using “Resize before
send” (page 90).
• You can use the smartphone apps below to view snapshots after sending them.
– iPhone: Camera Roll
– Android terminal: Gallery or another photo browser app
Sending a Just-recorded Snapshot to a Smartphone
(Quick Send)