Filter
Top Products
255
APPENDIX
Playback
The color of the playback
image is different from what
appears on the monitor
screen when shooting.
Sunlight or light from another source may be shining directly into the lens when you are shooting. Position
the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
I can’t edit images (resizing,
trimming, keystone correction,
color restoration, rotation,
date/time editing).
Note that you cannot edit the following types of imagess.
• Images created with MOTION PRINT
•Movies
• Images recorded with another camera
Other
The wrong date and time are
displayed.
The date and time setting is wrong. Set the correct date and time (page 193).
The messages on the display
are in the wrong language.
The wrong display language is selected. Change the display language setting (page 197).
I can’t transfer images over a
USB connection.
1) The USB cable may not be connected securely. Check all connections.
2) If your computer is running Windows 98SE or 98, the USB driver may not be installed. Install the USB
driver (page 215), which you can download from the official EXILIM Website at http://www.exilim.com/
3) If your computer is running Windows 98SE or 98, the USB driver may be installed incorrectly. Reinstall
the USB driver correctly (page 215).
4) The wrong USB communication protocol may be selected. Select the correct USB communication
protocol in accordance with the type of device you are connecting (page 198).
5) If the camera is not turned on, turn it on.
Problem Possible Causes and Action