Filter
Top Products
79
Using BEST SHOT
7. Point the camera at the
subject you want in the
center of the image and
then half-press the
shutter button to focus.
• The outer blue boundary
on the screen indicates the
recordable range of the
image.
8. Press the shutter button the rest of the way
down and slowly move the camera in
accordance with the instructions and arrow
that appear on the monitor screen.
• Holding the camera firmly with both hands, follow
the instructions that appear on the monitor screen
to slowly slide the camera horizontally or vertically
in an arc centered on your body.
– When sliding the camera horizontally, do not
allow your body to move left or right. A vertical
line running through your body should serve as
the axis.
– When sliding the camera vertically, do not allow your body to move upwards
or downwards. A horizontal line between your shoulders should serve as the
axis.
– Take care not to slide the camera diagonally and be sure to maintain a firm
grip on it.
• The camera will start composing the super-wide image internally when the
slide cursor reached the other end of the movement range.
• Image composing also will start automatically if you stop moving the camera
during super-wide shooting. After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera processes the image. Wait until
this message disappears before using the camera. Image shooting is disabled
while the message is displayed.
NOTE
• The “14 mm” and “18 mm” angle of view values are approximate and are provided
for reference only. Actual angle of view values are not guaranteed.
• Zoom operations are not supported during Wide Shot shooting. The zoom setting
is fixed at full wide angle.
• This function makes it possible to shoot images with a maximum angle of view of
14 mm or 18 mm. Note, however, that shooting conditions can result in a smaller
angle of view.
Desired image
Center part at the start of
the shooting operation
Blue boundary
Instructions
Arrow