Filter
Top Products
165
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * REC
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode.
Procedure
[MENU] * Set Up Tab *
Ü
Disabled
The camera will not start the image delete operation when you press [2] ( ) while
“Ü Disabled” is turned on.
You can protect against accidental deletion of images by selecting “On” for
“Ü Disabled”.
• Performing a format operation (page 167) will cause all images to be deleted, even
if file deletion is disabled (“On” selected for “Ü Disabled”) for some images.
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Configuring [r] Setting (REC)
Power On Camera turns on whenever [r] (REC) is pressed.
Power On/Off Camera turns on or off whenever [r] (REC) is pressed.
Disable Camera does not turn on or off when [r] (REC) is pressed.
Disabling File Deletion (
Ü
Disabled)
Configuring USB Protocol Settings (USB)
Mass Storage
Select this setting when connecting to a computer (pages 141,
149). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
PictBridge (page 132).