Filter
Top Products
46
Snapshot Tutorial
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom
controller and then holding it again towards z (Telephoto) will switch to digital
zoom, which you can use to set an even higher zoom factor.
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
• The image deterioration point
depends on the image size (page
34). The smaller the image size,
the higher the zoom factor you
can use before reaching the
image deterioration point.
• Though digital zoom generally
causes a deterioration of image
quality, some digital zoom
without image deterioration is
possible with image sizes of
“10M” and smaller. The range in
which you can use digital zoom
without image deterioration is
indicated on the display. The
deterioration point depends on
the image size.
Optical Zoom and Digital Zoom Switch Point
Image deterioration indicator
Zoom bar
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
12.5X to 84.4X
Undeteriorated image
quality range
1X
50.0X to 159.5X
Zoom pointer (Indicates current zoom.)
Image deterioration
Optical/digital zoom switch point
* 12.5X optical zoom point
Deteriorated image
quality range
Image
Size
Maximum
Zoom Factor
Undeteriorated
zoom limit
14M 50.0X 12.5X
3:2 50.0X 12.5X
16:9 50.0X 12.5X
10M 59.3X 14.8X
6M 76.6X 19.1X
3M 105.4X 26.4X
VGA 159.5X 84.4X