Channel Vision P-6014 Security Camera User Manual


 
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs
during normal use of this product with new or rebuilt parts, free of charge in the USA, for two years from
the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This
warranty does not cover damages in shipment, failures caused by other products not supplied by
Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment.
This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof
of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return
Authorization number must be obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to
state). If a problem with this product develops during or after the warranty period, please contact
Channel Vision Technology, your dealer or any factory-authorized service center.
500-199 rev D
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: techsupport@channelvision.com
Specifications: (typical @25º C)
P-6014
Dimensions: 5.5”W x 6.5”H x 1.5”D
Power Supply: 15VDC @ 1.6A
IR Frequency Range: 30-60kHz
Operating Temp: -10ºC to 50ºC
Audio Bandwidth: 20Hz - 20kHz
Video Crosstalk: -80dB
Video Bandwidth: DC - 20MHz
Video Crosstalk: -60dB
CAT5 Ports:
Max run length: 250ft (Camera input + Monitor output)
Max Camera Power: 12VDC @ 280mA
6210 Camera
Lens: 3.8mm
Resolution: 380 lines
S/N Ratio: More than 48dB
Min Illumination: 0.4 LUX @ F2.0
Power Consumption: 120mA