Filter
Top Products
• To prevent fire or shock hazard, do not expose the product to rain or moisture.
• To avoid electrical shock, do not open the case of this product.
• Operate this product using only the supplied AC Power supply.
• Do not overload electrical outlets or extension cords; this can result in fire or electric
shock.
• Keep this product away from strong magnetic fields.
• Do not expose this product in direct sunlight or strong reflected rays.
• Refer servicing to qualified personnel only.
• Do not change or modify this product, the warranty will be voided.
• 1/3” Sony Super HAD CCD
• High Resolution 540 TV Lines
• Rugged Steel Construction
• 4mm Fixed Board Lens
• Attached Mounting Bracket and 100’ cable
• DC 12V Power Source
1. Attach the mounting base① to the wall or ceiling, wherever you want to install the
camera. Locate a wall stud or ceiling joist and secure the mounting base using the
supplied screws②.
2. Set the desired angle of camera toward objects by pushing and moving the camera
body③ right /left and up/down.
3. Attach the camera body③ to the mounting base① and secure them with the supplied
screws④.
4. Put the transparent dome⑤ on to the camera body③ and then turn the locking ring⑥
clockwise to secure.
5. Connect the one end of 100’ cable (supplied) to the BNC (F) of 5’ cable attached to
the camera and the other end (BNC) of cable to the video devices such as DVR,
monitor/TV. Plug the provided AC power supply to the DC jack (red) on the end of
100’ cable.
PRECAUTIONS
FEATURES
INSTALLATION