Clover Electronics RD435 Digital Camera User Manual


 
PRECAUTIONS
To avoid electrical shock, do not open the case of this product.
Operate this product using only the supplied AC Power supply.
Do not overload electrical outlets or extension cords; this can result in fire or electric
shock.
Keep this product away from strong magnetic fields.
Do not expose this product in direct sunlight or strong reflected rays.
Refer servicing to qualified personnel only.
Do not change or modify this product, the warranty will be voided.
FEATURES
Weatherproof (IP67)
1/3” Sony Super HAD CCD
420 TV Lines of Resolution
Rugged Steel Construction
Total 8 Super Power Infrared LEDs with a CDS sensor
60’ IR range (depends on scene reflection)
Attached Mounting Base (for ceiling & wall) and 100’ cable
DC12V Power Source
INSTALLATION
1. Attach the mounting bracket (1) to the wall or ceiling, wherever you want to install
the camera. Locate a wall stud or ceiling joist and secure the mounting base using the
supplied screws (2). Attach the camera to the mounting hole (3).
2. How to set angle of view:
Set the desired angle of camera toward objects by moving the camera right /left and
up/down.
3. Connect the one end of 100’ cable (supplied) to the Din jack of 5’ cable attached to
the camera. Make sure that two arrows on the top of them should be aimed at each
other. Connect the other end (BNC or RCA) of cable to the video devices such as
DVR, monitor/TV. Plug the provided AC adapter to the DC jack (red) of the end of
100’ cable.