Clover Electronics RD5354 Security Camera User Manual


 
·
KEY FEATURES
True Day/Night Performance
Weather Resistant
Rugged Aluminum Construction
Resolution 450 TV Lines
Built-in ICR (IR Cut Filter Removal)
Total 18 Infrared LEDs with a CDS sensor
Up to 40’ IR range (depends on scene reflection)
Built-in Water Proof Microphone for Indoor / Outdoor Use
60ft Cables (6pin Din to BNC/DC) & A/C Adapter Included
Connect the Cameras to Any DVR Systems or a monitor/TV.
·
INSTALLATION
1. Attach the mounting bracket to the desired location on the wall or ceiling,
wherever you want to install the camera. Locate a wall stud or ceiling
joist and secure the mounting bracket using the supplied screws.
2. Connect the one end (6pin Din) of 60cable to the 2breakout
cable. Make sure that two arrows on the top of them should be aimed at
each other.
3. Connect the BNC (yellow) on the end of 60cable to the one out of
video inputs on the rear of DVR or a monitor/TV and DC jack (red) to
AC adapter (ADT123004). Plug the provided AC adapter (ADT123004)
to AC outlet: refer to the illustration above.
If necessary, Connect the RCA (white) to an audio input.
·
SPECIFICATIONS
·
PACKAGE INCLUDES
4 - True Day/Night Camera
4 - 60' Cable (6pin Din to BNC/DC jack)
4 - Mounting Bracket
4 - BNC to RCA Adapter
1 - Mounting Screw Set
1 - AC Power Supply with 4 DC Output
1 - Warranty Registration Card
1 - Instruction Manual
Image Pickup Device
TV System
Array Size
Image Area
Resolution
Minimum Illumination
IR LED
S/N Ratio
Gamma Characteristics
Video Output
Audio Output
Microphone
Exposure Time Range
Lens
Current Consumption
Power Supply
Operational Temperature
Dimensions
Weight
¼” Color Image Sensor
NTSC
656 x 492
4.080 mm x 3.102mm
450 TV Lines
0 Lux @ (LED On), 0.1 Lux @F1.2 (LED Off)
18pcs, Wave Length: 850nm
More than 48db
0.45
1.0v p-p Composite, 75 Ohms
600 ohm Max, 3Vp-p
Waterproof C-Mic
1/60s - 20µs
3.6mm Fixed Lens
230 mA @ LED On
DC 12V
-10ºC to 50ºC RH95% Max
56(Ø) x 81(L) mm
1.1Lbs