Filter
Top Products
11
Changing the resolution
To change the resolution, press the Mode Button until the resolution
option is displayed in the LCD. The resolution is noted by HR for
high resolution and Lr for Low resolution. When the resolution you
would like to select appears in the LCD, press the shutter button to
confirm your choice. The camera will then enter the picture taking
mode. The camera can store up to 22 images in the High Resolution
mode and up to 99 images in the Low Resolution mode.
Self-timer
Press the Mode button until ‘St’ appears in the LCD. Press the
Shutter button to start a 10-second self-timer count down. The
camera will issue a series of short beeps followed by a long beep.
When the picture has been captured, the LCD will be updated.
Video Clips
Press the Mode Button until Ct appears in the LCD. Press and hold
the shutter button to record video clips. The camera will record
video clips as long as the shutter button is pressed or until the
memory is full. While the video is being recorded, the camera will
emit a series of beeps and the length of the video in seconds will
flash on the LCD. To stop recording, release the shutter button. The
frame counter on the LCD will increase by one.
Note: The camera is designed to record video clips regardless of
the lighting conditions. Pay special attention to the light
conditions while in this mode to optimize image quality.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 11