Filter
Top Products
123
Connecting to a Computer
Connecting to Televisions, Computers and Printers
B Notes on Power Source
• When connecting the camera to a computer, use a battery with a sufficient amount of charge
remaining to prevent the camera from turning off unexpectedly.
• When the camera is connected to a computer via the supplied USB cable with Auto (default
setting) selected for the Charge by computer option in the setup menu, the battery inserted into
the camera is automatically charged using power supplied by the computer (A 127, 150).
• If the AC Adapter EH-62G (A 159) (available separately) is used, COOLPIX S3100 can be powered
from an electrical outlet. Do not use any other make or model of AC adapter as they may cause the
camera to overheat or malfunction.
Transferring Images from a Camera to a Computer
1 Start the computer to which ViewNX 2 was installed.
2 Be sure that the camera is off.
3 Connect the camera to the computer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
The camera is automatically turned on and the power-on
lamp will light. The camera monitor will remain off.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.