Filter
Top Products
4 5
INTRODUCTION 5
Components and Connection 6
Installing Your Camera 7
Connecting the Camera to a Security DVR System 9
Connecting the Camera to a TV or Monitor 10
Controlling Your Camera 10
Operation 11
Setup Menu 11
Lens 11
Shutter/AGC (Automatic Gain Control) 12
White Balance 12
Backlight 13
Picture Adjust 13
ATR (Adaptive Tone-curve Reproduction) 13
Motion Detection 14
Privacy 14
Day/Night Mode 15
NR (Noise Reduction) 15
Camera ID 16
Sync 16
Language 16
Camera Reset 16
TROUBLESHOOTING 17
Q-SEE PRODUCT WARRANTY 18
TABLE OF CONTENTS
For your safety
To prevent damage to your Q-See product or injury to yourself or to others, read and
understand the following safety precautions in their entirety before installing or using this
equipment.
Product Features
These cameras offer the following features:
nUltra high definition video using 1/3” Sony HAD CCD II coupled with the latest Sony Effio-E
digital signal processors to produce 600 and 650 TV lines of resolution.
nState-of-the-art IR cut filter to ensure accurate color representation during the day and
sharper images at night.
nLow light and infrared operation. The camera takes advantage of even low levels of
ambient lighting to produce images with color.
nAutomatically switches to infrared (black and white) mode when no light is detected.
nInfrared illumination (excludes QD6305X).
nBuilt-in motion detection. The camera can be set to respond to motion even without being
connected to a DVR.
nOn-Screen Display (OSD) allows you to configure the camera using the built-in thumbstick
when connected to a monitor.
nMultiple language support; English, Spanish, French, Russian, Portuguese, German,
Chinese and Japanese.
nCustomizable settings: WDR (wide dynamic range), White Balance, Contrast, Shutter
Speed, Sharpness, etc.
nHighlight Compensation. Excessive light, such as headlights, can be masked if desired.
nManually adjustable 2.8mm to 12mmm varifocal lens and focus.
nHigh-speed Moving Object Capture function allows clear images of objects moving at high
speed.
INTRODUCTION
nCare should be taken during transportation, storage and installation of this camera to
avoid rough handling, dropping, or other abuse in order to prevent damage to the optics or
components inside the camera.
nCamera should be installed in accordance with electrical standards including keeping the
camera and cable away from high voltage, using a surge protector and using only the
rated power supply.
nDo not use strong or abrasive cleaners on camera body or lens. Use a damp cloth for
cleaning the housing and a lens cloth for the optics.
nDo not attempt to disassemble the camera. Only authorized, trained technicians should
service this camera.
nCameras should not be immersed in water and should be mounted in a sheltered location.
Do not point camera directly at the sun or other strong light source.
WARNING! ELECTRIC SHOCK RISK!