Filter
Top Products
Notes
4. Controls and Slots
1. Display 8. Up
2. Decorative Frame 9. USB
3. Enter 10. On/Off
4. Shift 11. DC Power
5. Right 12. MS/SD/MMC
6. Left 13. SM/XD
7. Down 14. CF/MD
5. Setting up the Digital Picture Frame
1. Open the package and remove the protective foam. Remove the protective
sleeve from the unit.
2. Plug in the AC adapter into power outlet. Plug the other end into the unit.
3. After the content is stored on the target flash media, insert the media into the
proper slot.
4. Turn power to on position via the On/Off switch. The power switch is on the
right side of the Digital Picture Frame.
5. As default, the first file in the card will be displayed first. The play sequence
is sorted by the file name alphabetically, regardless of file type. Therefore, an
MP3 could be played first, followed by a second MP3 or an image or a video.