Filter
Top Products
31
SETUP > Time and Date
This option allows you to configure, update, and maintain the correct time on the internal
system clock. From this section you can set the time zone that you are in and set the NTP
(Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust
the time when needed.
Time Zone: Select your time zone from the drop down menu.
Enable Daylight Saving: If your region uses a Daylight Saving adjustment, check this
checkbox.
Auto Daylight Saving: This option will adjust Daylight Saving Time automatically.
Set date and time manually: Selecting this will let you set the Daylight Saving Time
adjustment manually:
Daylight Saving Offset: This will set the Daylight Saving adjustment that will be
used.
Daylight Saving Date: This will set the beginning and ending dates of the Daylight
Saving period.
You can have the camera's clock set automatically, or manually.
Synchronize with NTP Server: Checking this checkbox will allow the camera to synchronize
its clock with an NTP server.
NTP Server: Use the dropdown box to the right to select an NTP server to use, or you can
type one in.
Set date and time manually: Check this checkbox to set the time and date manually. You
can then use the dropdown boxes to select the current Year, Month, Day, Hour, Minute, and
Second. You can also click the Copy Your Computer's Time Settings button to automatically
fill in the dropdown boxes with the current time and date from your computer.
After making any changes, click the Save Settings button to save your changes, or click the
Don’t Save Settings button to discard your changes.