Filter
Top Products
49D-Link DCS-3415 User Manual
Section 4 - Configuration
Enable motion
detection:
Window name:
Sensitivity:
Percentage:
New:
Save:
Check this option to turn on the motion detection
feature.
Enter your own name for the monitored area/
window. It will show at the top of the motion
window.
Set the measurable difference between two
sequential images that would indicate motion.
Set the amount of motion in the window being
monitored that is required to initiate a motion
detected alert. If this is set to 100%, this means
that motion is detected within the whole window
to trigger a snapshot.
Note: Setting a higher sensitivity and a lower
percentage will make any motion more easily.
Click to add a new window. A maximum of three
motion windows can be opened simultaneously.
Use your mouse to drag the window frame to
re-size or the title bar to move. Clicking on the ‘x’
at the upper right corner of the window will close
the window.
Save the related settings of that window.
Motion Detection
Enabling Motion Detection will allow your camera to serve as a security device that will record when motion is
detected.