Filter
Top Products
28D-Link DCS-3716 User Manual
Conguration
Image Setup
In this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy
Mask:
Mirror:
Flip:
White Balance:
Exposure
Mode:
Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:
WDR Level:
Reset Default:
The Privacy Mask setting allows you to specify upto 3 rectangular areas
on the camera's image to beblocked/excluded from recordings and
snapshots.
You may click and drag the mouse cursor over thecamera image
to draw a mask area.Right clicking on the camera image brings up
thefollowing menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
Mirrors the images.
Rotates the image 180 degrees.
If this option is enabled, white objects will be rendered as white on the
screen.
Changes the exposure mode. Use the dropdown box to set the camera
for Indoor, Outdoor, or Night environments, or to capture Moving objects.
The Low_Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the
maximum amount of gain to apply to brighten the picture.
This setting controls the amount of noise reduction that will be applied to the picture.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
This setting controls the amount of coloration, from grayscale to fully saturated.
Specify a value from 0 to 8 for image edge enhancement.
Adjust the wide dynamic range level from 0 to 8; higher settings are better for high-contrast environments.
Click this button to reset the image to factory default settings.