D-Link DCS-930L Security Camera User Manual


 
10D-Link DCS-930L User Manual
Section 2 - Installation
Hardware Installation
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector
located on the bottom panel of the DCS-930L and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC Power receptor located on
the rear back panel of the DCS-930L and connect it to your wall outlet
or power strip. Power is conrmed when the green LED Power Indicator
located below the lens on the DCS-930L is illuminated.
Installation