Filter
Top Products
MYDLINK NETWORK VIDEO RECORDER
DNR-322L
SIMPLIFIED SURVEILLANCE VIDEO MANAGEMENT
D-Link Corporation
No. 289 Xinhu 3rd Road, Neihu, Taipei 114, Taiwan
Specifications are subject to change without notice.
D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners.
©2011 D-Link Corporation. All rights reserved.
Release 01 (August 2011)
TECHNICAL SPECIFICATIONS
HARDWARE SPECIFICATIONS
STANDARDS
IEEE 802.3/u/z
Auto MDI/MDI-X
SATA I, II
HARD DISK
1
Hard Disk control & management via PC
Reformat Disk
RAID 0
2
RAID 1
2
JBOD
TWO RESET MODES
Reset firmware GUI button
HW reset button (hold for 5 seconds)
FLASH ROM
128 MB
RAM
256 MB DDR II
NETWORK INTERFACE
Gigabit Ethernet LAN port (10/100/1000 Mbps)
I/O PORTS
RJ45 port
DC-in jack
USB port for UPS status update (optional)
POWER ADAPTER
DC 12V/4 A
RESET BUTTON
Reset to factory default
SECURITY
Device lock hole
POWER CONSUMPTION
Max. power consumption: 25.20 W
Standby state max. power consumption: 0.23 W
DIMENSION (W x D x H)
115 x 146.4 x 178.5 mm
(4.53 x 5.76 x 7.03 inches)
WEIGHT
0.875 kg (1.93 lbs)
OPERATING TEMPERATURE
0˚ to 55˚ C (32˚ to 131˚ F)
STORAGE TEMPERATURE
-20 to 70 ˚C (-4 to 158 ˚F)
HUMIDITY
Operating: 5% to 90% (non-condensing)
CERTIFICATIONS
CE
FCC
RoHS
PACKAGE CONTENTS
DNR-322L 2-Bay mydlink NVR
Power Adapter
Ethernet Cable
Quick Installation Guide
Power Cable Holder
CD-ROM with:
Software
Product Documentation
YOUR NETWORK SETUP
1
Hard disks not included.
2
RAID 0 and RAID 1 mirroring requires the use of two internal SATA drives. To avoid data incompatibility in RAID 1 operation, use identical SATA drives from
the same manufacturer. Formatted drive capacity for RAID 1 operation is dependant on the drive capacity of the lowest-sized drive. Some older generation
SATA drives may not be compatible. For a list of SATA drives that have been tested to work with the NVR, visit the D-Link support website.