Filter
Top Products
Durst Phototechnik
AG
Large Format Division
Vittorio-Veneto-Straße 59
I-39042 Brixen, Italy
Telefon +39 04 72 81 01 11
Telefax +39 04 72 83 09 80
www.durst-online.com
info@durst.it
The latest technical developments
are constantly being incorporated
into Durst products. Illustrations and
descriptions are therefore subject to
modification. All rights reserved on
images and illustrations.
©
Durst Phototechnik AG, 08/2006
IX14015
General specifications
Power Supply:
230/208 V AC ±10 %, single phase, 50/60 Cycles
Power Consumption:
max. 1500 VA/6 Ampere per phase
Dimensions:
Width: approx. 240 cm (95 in.)
Length: approx. 240 cm (95 in.)
Height:
Lambda 131 HS-Turret: approx. 194 cm (77 in.)
Lambda 131 HS: approx. 180 cm (71 in.)
Weight:
Lambda 131 HS-Turret:
approx. 1.500 kg (3.300 lb.)
Lambda 131 HS:
approx. 1400 kg (3080 lb.)
Space requirement:
approx. 4 x 5 m (13 x 16 ft.)
Laserclass:
Laserclass I
Safety and Standard Specifications:
CE
Image Processor
Image Computer:
HP Linux-Workstation XW8200
RAM:
1 GB (2 x 512 DDR2-400)
Hard Disk:
3 x 36 GB internal hard disks with 1500 RPM
Drives:
DVD
Operating system:
Red Hat Enterprise Linux
Monitor:
HP TFT 19“ Monitor L1955
Graphic adapter:
1 Nivida Quadro NVS 280 64PCI-E
Network Protocol:
TCP/IP, NFS (Network file system)
Interfaces:
• Ultrawide-SCSI
• 100 Base T Fast Ethernet automatically
switchable to 10 M bit
• DEC 423 (modem)
• RS 232 (for densitometer)
Imaging Specifications
Exposure system:
patented continuous roll-to-roll, single beam,
three color (RGB) laser full continuos tone
exposure system.
File Formats:
• Grayscale CMYK and RGB-TIFF, TIFF/LZW,
BMP and JPEG
• PostScript Level 2 and 3 (PS, single or
multipage, including CMYK, RGB and
Grayscale images) Type 1 fonts only)
• PDF (single or multipage)
• RGB-PPM Raw format
Colors:
16.7 million possible colors
(input 24 bit/Internal 36 bit)
Adressable Levels:
256 levels each RGB
Resolution:
dual resolution of 200 and 400 pixels per inch
(switchable) (Continuous tone) with on-the-fly
pixel interpolation
(4000 dpi apparent resolution)
RIP:
Cheetah by Dice America
Linear output speed:
• 200 ppi
approx. 65 cm (26 in.) per minute, equal to
approx. 40 prints 100 x 130 cm (40 x 50 in.)
per hour.
• 400 ppi
approx. 32 cm (13 in.) per minute
Laser:
Red, green, blue
Laser live time:
guaranteed 12 months
Paper transport
Feeding Device:
Lambda 131 HS-Turret:
5-position paper turret
Lambda 131 HS:
Single-position paper feed
loading level: approx. 140 cm (55 in.)
Take-up Device:
Automatic take-up device with automatic paper
loading and built-in automatic paper cutter
Paper width and lengths:
Width Length
127.0 cm (50 in.) 50 m (164 ft)
110.0 cm (43 in.) 50 m (164 ft)
106.7 cm (42 in.) 50 m (164 ft)
105.0 cm (41 in.) 50 m (164 ft)
101.6 cm (40 in.) 50 m (164 ft)
81.2 cm (32 in.) 50 m (164 ft)
76.2 cm (30 in.) 50 m (164 ft)
70.0 cm (27,5 in) 50 m (164 ft)
50.8 cm (20 in.) 83 m (275 ft)
Minimum Print Length:
1 cm (0.4 in)
Minimum Paper Advance:
30 cm (12 in.), including exposed area
Max. Paper Waste:
20 cm (8 in.) at the beginning of the media roll
Environmental requirements
Max. Altitude:
2.400 m (8.000 ft) above sea level
Temperature range:
+ 15°C to 30 °C
(+59 °F to 86 °F)
Relative humidity:
25-80 %
Technical Data