Dynex DX-DPF7-10 Digital Photo Frame User Manual


 
Troubleshooting
17
To delete pictures from internal memory:
1 Remove any card or USB memory device you have inserted
in the frame.
2 Locate the picture you wish to delete in SLIDESHOW or
BROWSE mode, then press COPY/DEL. A message asks if
you want to delete the picture.
3 Press or to highlight YES, then press MODE/ENTER
to confirm.
Note: The delete function will only delete pictures saved in the
frame's memory, not from a memory card.
Troubleshooting
Problem Solution
The frame won't turn on. Make sure that the AC adapter is inserted properly
into the frame.
A memory card is
inserted in your digital
picture frame but
pictures cannot be
viewed.
Make sure that the memory card is one of the
supported formats and that the files on the card are
JPEG image files.
Turn your frame off and make sure that the
memory card is inserted all the way into the card
slot, then turn the frame on again.
Note: Some digital cameras save images in formats
other than JPEG. Refer to your camera's manual if your
pictures are not JPEG files.
09-0442 DX_DPF7-10_MAN_ENG_V1.fm Page 17 Tuesday, July 7, 2009 3:00 PM