Filter
Top Products
The Camera features two ports and a Reset button.
y Antenna
Standard reverse SMA connector where any antennas with reverse SMA
connector can connect to the Internet Camera.
y Power
The Power jack is where you can connect the power adapter.
y LAN
The LAN jack is where you can connect the Ethernet network cable.
y Reset
1. If problems occur with your Internet Camera, press the reset button with a
pencil tip (for less than 2 seconds) and the Internet Camera will reboot itself
with your configurations.
2. If problems persist or you experience extreme problems or you forgot your
password, press the reset button for longer than 5 seconds. The Internet
Camera will reset itself to the factory default settings (warning: your original
configurations will be replaced with the factory default settings).
Power Jack
Reset Button
LAN Port
4