Filter
Top Products
EVC MH LED System Menu
ADDR - DMX Address Setting.
1. Press the MENU, UP, or DOWN buttons until “ADDR” is dis-
played, press ENTER.
2. The current address will now be displayed and ashing. Use
the UP and DOWN buttons to nd your desired address. Once
you have found your desired DMX address press ENTER then
press and hold the MODE button for at least 3 seconds to set
the address.
TLTN - Tilt Inversion
1. Press the MENU button until “TLTN” is displayed, press
ENTER. Either NO or 1 will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons
until I is displayed, press ENTER to conm. To deactivate Tilt
inversion, select No and press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “LED” is displayed, press
ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at
all times, or “OFF” to have the LED display switch o after 10
seconds.
3. Press ENTER to conrm.
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press
ENTER.
2. Press ENTER to “ip” the display. Press ENTER to “ip” it
again. Press ENTER when you have made your desired setup.
MANU - In this mode you are able to manually test the
various functions; Pan and Tilt and Pan/Tilt Speed, color
temperature, LED intensity, zoom and focus.
1. Press the MENU button until “MANU” is displayed, press
ENTER. One of the submenus listed below will be displayed.
2. Use the UP and DOWN buttons to nd the function that you
would like to test. When you have found it press ENTER.
3. Once you have entered the submenu, use the UP and DOWN
buttons to adjust the values and test the function.
4. Once you are nished, press the MENU button to exit.
SUBMENUS:
PAn - Test the Pan function.
PAnF - Test the Fine Pan.
tiL - Test the Tilt function.
tiLF - Test the Fine Tilt.
SPed - Test the Pan and Tilt Speed.
CoLt - Test the Color Temperature.
UdIn - Test the Warm White intensity.
Cdln - Test the Cool White intensity.
Zon - Test the Zoom.
Foc - Test the Focus.
VER - With this function you can display the version soft-
ware of the unit.
1. Press the MENU button until “VER” is displayed, press
ENTER.
EVC MH LED System Menu
Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 9
Elation Professional - www.elationlighting.com - EVC MH LED Instruction Manual Page 10