Filter
Top Products
Viewing VHS and Laserdiscs
1. Turn on Elmo.
2. Select AV2 located under Input on the Elmo Base.
3. Turn on Projector.
4. Turn on Either the VCR or the Laserdisc Player. ( DO NOT TURN ON
BOTH OF THEM TOGETHER. When they are both on the projected
image is distorted by static. )
5. Turn on the AIWA Tuner ( In C2 the Tuner is SONY instead of AIWA ).
6. Press button labeled Video 1/5.1 ch.
7. Insert your VHS tape or Laserdisc and press play.
8. Adjust volume on the Tuner – Master volume control is a big round knob on
the right side.