Filter
Top Products
Remove the cable cover.
Remove the rear cover by
unscrewing the two thumb
screws and sliding the cover
upward.
Insert memory module into an
available socket, or replace an
existing module.
Note: Model B1, B3, C1, C3
touchcomputers have only one
memory socket.
Re-install the rear cover, tighten
the thumb screws, and reinstall
the cable cover.
Remove the two retaining
screws from the cover plate of
the computer module.
For B/C Series Touchcomputers
For IDS Computer Modules
Insert memory module into an
available socket, or replace an
existing module.
Note: Model ECM1 has only
one
memory socket.
Reinstall the retaining screws on
the cover plate of the computer
module.
3
2
1
2
3
4
1
2
3